Align
Align TN70 Nitro Helicopter Super Combo (W/o Engine and FBL Unit)
RH70N41XT
Regular price $1,399.99 Sale price $1,108.79
Electric equipment
●DS830M High Voltage Brushless Servo x 3●DS835M High Voltage Brushless Servo x 1
●DS530 Digital Servo x 1
●B6M 2 In 1 Voltage Regulator Combo x 1
●ALIGN 105 High Performance Pipe x 1
●Governor Sensor x 1
Specification
●Length: 1352mm●Height: 397mm
●Width: 202mm
●Main Blade Length: 690mm
●Main Rotor Diameter: 1543mm
●Tail Rotor Diameter: 279mm
●Tail Drive Belt Pulley:27T
●Main Drive Gear:107T
●Autorotation Tail Drive Gear: 102T
●Tail Drive Gear: 23T
●Drive Gear Ratio: 7.43:1:4.23
●Engine: 105 Nitro Engine
●Fuel Tank Capacity: 630cc.
●Takeoff Weight: Approx. 4110g
Accessories
●TN70 Kit Set x 1 set●690 Carbon Fiber Blades x 1 set
●105 Carbon Fiber Tail Blades x 1 set
●ALIGN 105 High Performance Pipe x 1
●DS830M High Voltage Brushless Servo x 3
●DS835M High Voltage Brushless Servo x 1
●DS530 Digital Servo x 1
●B6M 2 In 1 Voltage Regulator Combo x 1
●Governor Sensor x 1
Radio transmitter and electronic equipment required for assembly
●Transmitter(7-channel or more, helicopter system)●Receiver(7-channel or more) or Remote Receiver
●Flybarless System x1
●Engine starter x 1
●Fuel pump x 1
●105 Engine x 1
●Engine fuel x 1
●Digital Pitch Gauge
●Multi-function Tester
●2S1P 7.4V Li-Po 1900~2600mAh Battery x 1
Align TN70 Nitro Helicopter KIT (with Pipe)
RH70N36XT
Regular price $1,099.99 Sale price $809.99Electric equipment
●ALIGN 105 High Performance Pipe x 1●Governor Sensor x 1
Specification
●Length: 1352mm●Height: 397mm
●Width: 202mm
●Main Blade Length: 690mm
●Main Rotor Diameter: 1543mm
●Tail Rotor Diameter: 279mm
●Tail Drive Belt Pulley:27T
●Main Drive Gear:107T
●Autorotation Tail Drive Gear: 102T
●Tail Drive Gear: 23T
●Drive Gear Ratio: 7.43:1:4.23
●Engine: 105 Nitro Engine
●Fuel Tank Capacity: 630cc.
●Takeoff Weight: Approx. 4110g
Accessories
●TN70 Kit Set x 1 set●690 Carbon Fiber Blades x 1 set
●105 Carbon Fiber Tail Blades x 1 set
●ALIGN 105 High Performance Pipe x 1
●Governor Sensor x 1
Radio transmitter and electronic equipment required for assembly
●Transmitter(7-channel or more, helicopter system)●Receiver(7-channel or more) or Remote Receiver
●Flybarless System x1
●Engine starter x 1
●Fuel pump x 1
●105 Engine x 1
●Engine fuel x 1
●DS830M High Voltage Brushless Servo x 3
●DS835M High Voltage Brushless Servo x 1
●DS530 Digital Servo x 1
●B6M 2 In 1 Voltage Regulator Combo x 1
●Digital Pitch Gauge
●Multi-function Tester
●2S1P 7.4V Li-Po 1900~2600mAh Battery x 1
Align TB70 Electric Helicopter Top Combo (Blue - New Version)
RH70E53XT
Regular price $1,899.99 Sale price $1,655.99Electric equipment
- Platinum HV 200A V4 Brushless ESC x 1
- 850MX Brushless Motor(540KV/4535) x 1
- DS830M High Voltage Brushless Servo x 3
- DS835M High Voltage Brushless Servo x 1
Specification
- Length: 1356mm
- Height: 358mm
- Width: 187mm
- Main Blade Length: 650-730mm
- Main Rotor Diameter: 1542mm
- Tail Length: 105-115mm
- Tail Rotor Diameter: 279mm
- Motor Belt Pulley: 22T
- Belt Pulley: 50T
- Front Drive Main Shaft: 15T
- Main Drive Gear: 62T
- Autorotation Tail Drive Gear: 27T
- Tail Drive Gear: 23T
- Drive Gear Ratio: 9.38:1:4.83
- Max RPM(approx.): 2400RPM
- Flying Weight(With Battery): Approx. 5kg (ALIGN 12S 5200mAh)
Accessories
- TB70 Kit Set x 1 set
- 700 Carbon Fiber Blades x 1 set
- 105 Carbon Fiber Tail Blades x 1 set
- 850MX Brushless Motor(540KV/4535) x 1
- DS830M High Voltage Brushless Servo x 3
- DS835M High Voltage Brushless Servo x 1
- Platinum HV 200A V4 Brushless ESC x 1
Radio transmitter and electronic equipment required for assembly
- Transmitter(6-channel or more, helicopter system)
- Receiver(6-channel or more)
- RCC-6CX Intelligent Balance Charger
- 22.2V 6S 4000~4800mAh Li-Po Battery x 2
- Digital Pitch Gauge
- Multi-function Tester
- Flybarless System
Align TB70 Electric Helicopter Kit (Yellow) with 850MX (490Kv) Motor
RH70E63XT
Regular price $999.99 Sale price $834.29Focus Shots
Electric equipment
- 850MX Brushless Motor(490KV/4535) x 1
Specification
- Length: 1356mm
- Height: 358mm
- Width: 187mm
- Main Blade Length: 650-730mm
- Main Rotor Diameter: 1542mm
- Tail Length: 105-115mm
- Tail Rotor Diameter: 279mm
- Motor Belt Pulley: 23T
- Belt Pulley: 50T
- Front Drive Main Shaft: 15T
- Main Drive Gear: 62T
- Autorotation Tail Drive Gear: 27T
- Tail Drive Gear: 23T
- Drive Gear Ratio: 8.96:1:4.83
- Max RPM(approx.): 2290RPM
- Frame Weight: Approx. 2.3kg
Accessories
- TB70 Kit Set x 1 set
- 700 Carbon Fiber Blades x 1 set
- 105mm 3K Carbon Fiber Tail Blades x 1 set
- 850MX Brushless Motor(490KV/4535) x 1
Radio transmitter and electronic equipment required for assembly
- Transmitter (6-channel or more, helicopter system)
- Receiver (6-channel or more)
- RCC-6CX Intelligent Balance Charger
- 22.2V 6S 4000~4800mAh Li-Po Battery x 2
- Digital Pitch Gauge
- Multi-function Tester
- Flybarless System
- CCPM Brushless Servo x 3
- Rudder Brushless Servo x 1
- Brushless ESC x 1
Align TB60 Helicopter Combo (6S)
RH60E26XT
Regular price $1,499.99 Sale price $1,259.99Align TB60 Helicopter Combo (12S)
RH60E21XT
Regular price $1,399.99 Sale price $1,241.99Align TB40 Helicopter TOP Combo RH40E01XT
RH40E01XT
Regular price $599.99 Sale price $534.99Align TB40 Helicopter Kit with 400MX (1100kv) Motor
RH40E06XT
Regular price $399.99 Sale price $304.49Align T-rex T15 Combo (BNF) - Yellow
RH15E22XT
Regular price $299.99 Sale price $229.991. For Spektrum transmitter user: You will need an DSMX satellite with 2 antennas come out (SKU: SPM9645) for binding with your radio. Make sure your radio Frame Rate is set as 11ms before you binding. If you use the DSMX with 1 antennas come out (SKU: SPM9745), it will not bind. We addressed this problem with our manufacture and app developer. They will update and fix it soon.
2. For Futaba transmitter user: Before you binding your radio to the helicopter, please go to setting and update receiver boards. Make sure your radio protocol set as S-FHSS.
3. For the JR sat (JR DMSS RA 01L), you have to rewire the cable to match with the sat output from the board. If you still can't bind with the T15, you can bind it from the separate receiver before you plug it in the T15.
Focus Shots
Standard equipment
●T15 Main Blades x 1 set●15M Main Motor(1500KV/2405) x 1
●15MT Tail Motor(8000KV/1103) x 1
●T15 Digital Servo x 2
●T15T Digital Servo x 1
●T15 Tail Blades x 1 set
●Remote Extension x 1
●Li-Po Battery 2S 380mAh 50C x 1
T15 Specification
● Length: 272mm● Height: 85mm
● Main Blade Length: 120mm
● Main Rotor Diameter: 280mm
● Tail Rotor Diameter: 51mm
● Weight(Without Battery): 100g
Accessories
●T15 Kit x 1●T15 Main Blades x 1 set
●T15 Tail Blades x 1 set
●15M Main Motor(1500KV/2405) x 1
●15MT Tail Motor(8000KV/1103) x 1
●T15 Digital Servo x 2
●T15T Digital Servo x 1
●Remote Extension x 1
●Li-Po Battery 2S 380mAh 50C x 1
●T15 Carry Box x 1
●1.3mm Hexagon screw driver(Blue/8.2g) x 1
●0.9mm Hexagon screw driver(Red/8g) x 1
●Feathering Shaft Wrench x 1
●Parts box x 1
DOWNLOAD T-15 iOS/Android app here-
Self-provided Equipment
ALIGN T6 or Futaba S-FHSS 2.4G Transmitter. For the use of JR and Spektrum system, require JR DSM2/DMSS, Spektrum DSM2/DSMX 2.4GHz Transmitter and Satellite.Align T-rex T15 Combo (BNF) - Blue
RH15E21XT
Regular price $299.99 Sale price $229.991. For Spektrum transmitter user: You will need a DSMX satellite with 2 antennas to come out (SKU: SPM9645) for binding with your radio. Make sure your radio Frame Rate is set as 11ms before you bind. If you use the DSMX with 1 antenna coming out (SKU: SPM9745), it will not bind. We addressed this problem with our manufacturer and app developer. They will update and fix it soon.
2. For Futaba transmitter user: Before you bind your radio to the helicopter, please go to settings and update receiver boards. Make sure your radio protocol is set as S-FHSS.
3. For the JR sat (JR DMSS RA 01L), you have to rewire the cable to match the sat output from the board. If you still can't bind with the T15, you can bind it from the separate receiver before you plug it into the T15.
Focus Shots
Standard equipment
●T15 Main Blades x 1 set●15M Main Motor(1500KV/2405) x 1
●15MT Tail Motor(8000KV/1103) x 1
●T15 Digital Servo x 2
●T15T Digital Servo x 1
●T15 Tail Blades x 1 set
●Remote Extension x 1
●Li-Po Battery 2S 380mAh 50C x 1
T15 Specification
● Length: 272mm● Height: 85mm
● Main Blade Length: 120mm
● Main Rotor Diameter: 280mm
● Tail Rotor Diameter: 51mm
● Weight(Without Battery): 100g
Accessories
●T15 Kit x 1●T15 Main Blades x 1 set
●T15 Tail Blades x 1 set
●15M Main Motor(1500KV/2405) x 1
●15MT Tail Motor(8000KV/1103) x 1
●T15 Digital Servo x 2
●T15T Digital Servo x 1
●Remote Extension x 1
●Li-Po Battery 2S 380mAh 50C x 1
●T15 Carry Box x 1
●1.3mm Hexagon screw driver(Blue/8.2g) x 1
●0.9mm Hexagon screw driver(Red/8g) x 1
●Feathering Shaft Wrench x 1
●Parts box x 1
DOWNLOAD T-15 iOS/Android app here-
Self-provided Equipment
ALIGN T6 or Futaba S-FHSS 2.4G Transmitter. For the use of JR and Spektrum system, require JR DSM2/DMSS, Spektrum DSM2/DSMX 2.4GHz Transmitter and Satellite.Align T-Rex 550X Electric Helicopter Combo
RH70E25XT
Regular price $1,299.99 Sale price $1,055.99All other components same as T-Rex 550X Super Combo (RH55E18X)
The NEW T-REX 550X is definitely a significant leap forward in performance, enhanced by increased power, the integration of numerous innovative design changes, and lightweight improvements. The T-REX 550X performance is outstanding!
The brand new FL Flybarless Rotor Head System utilizes an extremely low CG design, reducing resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 550X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. In addition, the T-REX 550X's lightweight design is 200~250g (Combo250g/Super Combo 200g) lighter than our pervious model, this effectively increase the power and improves flight time.
The T-REX 550X utilizes the powerful 730MX(960KV/4230) motor and our RCE-BL100A Brushless ESC which both are highly efficient providing superior power, improving the performance of the 6S power system. The NEW DS820/DS825 high voltage brushless servos are extremely efficient and out perform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.
With improved performance and increased power, as well as included top of the line electronic equipment. The new T-REX 550 X will arouse your enthusiasm and devotion to the T-REX Family.
Manufactured with durable lightweight fiber material, and utilizing an engineered aerodynamic design, the Align Advanced Lightweight Canopy forms a protective shield for the entire machine. The Align T-Rex 550X is 200g lighter than our pervious model.
Landing skid is tilted 5 degree forward which improves crashworthiness.
The 550EFL Flybarless Rotor Head System utilizes extreme low CG design to effectively reduce resistance during 3D maneuvers while increasing flight responsiveness and precision. In addition, the high quality of the helicopter design is accented with red anodized and stainless color precision machined metal parts.
Align Advanced Metal Swashplate firmly connects to rotor grips preventing rotor head disengagement during intense flight. Two linkage ball mounting holes provided to improve control of system movement. A resolution hole or larger movement reaction hole can be selected based on your flying preference or style.
Brand new 730MX motor is especially designed for power upgraded T-REX 550X, normally found in 700 class high spec helicopter, that enthusiasts can clearly feel the dramatic increase in power and torque, while taking advantage of its higher efficiency, lower current and temperature benefits. Features with high torque, high efficiency, stable and quiet.
The high-end Microbeast PLUS 6-axis gyro with 32-bit high-speed processor is much precise and superior in programming and computing allow for significant handling performance and delicate response. In addition, the Microbeast PLUS gyro is vibration-reducing improvement and strongly reduce the effects of the vibration to flying performance.
32-bit fast-speed processor.
High quality MOSFET.
Adjustable BEC function, supply power to receiver and servos.
Superior governor feature.
Support 730MX Brushless Motor, Extreme 3D Flight.
Support USB interface to PC for firmware updating.
Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and super efficient reaction time, allowing the Align 700X to perform faster with precision. The brand new DS820 high voltage brushless servo is equipped with a new CNC machined aluminum case. This new aluminum case exhibits top of the line servo aesthetics while providing a heat sink function for the best protection of the servo.
3K Main frame features; embedded battery mounting rails, integrated magazine structure, and a latch design which provides great protection for the battery while providing a convenient way for mounting. This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.
Integration of CNC Aluminum alloy and POM Polyacetal which can lower friction between the linkage ball and the Metal Anti Rotation Bracket. In addition, this new design increases the efficiencies and accuracy of the servos.
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.
Durable and Precise! Manufactured with stronger material, the Torque Tube Front Drive Gear is more durable and precise. The stronger material reduces the probability of gear striping during flight or damaging the gear as a result of a crash.
The newly designed dual point supported tail pitch assembly delivers slop free performance while improving rudder resolution and precision.
Standard equipment
●730MX Brushless Motor(960KV/4230) x 1●DS820 High Voltage Brushless Servo x 3
●DS825 High Voltage Brushless Servo x 1
●RCE-BL100A Brushless ESC x 1
●Microbeast PLUS Flybarless System x 1
Specification
•Length:1163mm•Height:344mm
•Width:196mm
•Main Rotor Diameter:1248mm
•Main Blade Lenght:550mm
•Tail Rotor Diameter:254mm
•Motor Drive Gear:16T
•Main Drive Gear:112T
•Autorotation Tail Drive Gear:131T
•Tail Drive Gear:34T
•Drive Gear Ratio:7:1:3.85
•Weight(w/o power system):2590g
Accessories
•T-REX 550X DOMINATOR Set x 1set•550 Carbon Fiber Blades x 1set
•90mm Tail Blades x 1set
•730MXBrushless Motor(960KV/4230) x 1
•DS820 High Voltage Brushless Servo x 3
•DS825 High Voltage Brushless Servo x 1
•RCE-BL100A Brushless ESC x 1
•Microbeast PLUS Flybarless System x 1
Radio transmitter and electronic equipment required for assembly:
1.Transmitter(7-channel or more,helicopter system)
2.Receiver(7-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 2600~5200mAh battery x 1
Align T-Rex 500X Dominator Super Combo Helicopter with DS530M/DS535M Metal Case Servos
RH50E17XT
Regular price $999.99 Sale price $827.99Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.
Refresh and refine, T-REX 500X adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to improve crashworthiness.
T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530M/DS535M digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.
Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.
Focus Shots
New extended 470mm main blades for T-REX 500X effectively improve the flying stability and power performance. Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters. New 78 size tail blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.
The brand new low CG 500FL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity. Allow to reduce resistance during 3D maneuvers, increased flight responsiveness and precision. In addition, the styling appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.
New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.
New 520MX(1600KV/3527) motor features high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. Allow to provide maintaining consistent torque and head speed through continuous 3D maneuvers.
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.
Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.
RCE-BL80X is specially designed for T-REX 500X providing higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.
Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.
DS530M HV Cyclic and DS535M HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.
Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.
Brand New Belt Drive Assembly design allow for quiet operation and low cost on serviceability.
Ultilize of strengthen main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the fficiency, speed, and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficient design to deliver the ultimate performance.
Landing skid is tilted 5 degrees forward to improve crashworthiness.
A 19mm wide Tail Boom to improves the torsional strength. Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.
The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 78 size Tail Blades.
Standard equipment
Microbeast PLUS Flybarless System x 1 setRCE-BL80X Brushless ESC x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530M Digital servo x 3
DS535M Digital servo x 1
Specification
Length: 935mmHeight: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Pinion Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Drive Gear: 21T
Drive Gear Ratio: 11.17:1:3.81
Weight(w/o battery): approx. 1450g
Accessories
T-REX 500X KIT Set x 1Microbeast PLUS Flybarless System x 1 set
470 Carbon Fiber Blades x 1
78 Tail Rotor Blade x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530M Digital servo x 3
DS535M Digital servo x 1
RCE-BL80X Brushless ESC x 1
Radio transmitter and electronic equipment required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 2600 ~ 3300mAh (3300mAh suggestion) PLU50-33006 or PLU70-33006
Digital Pitch Gauge
Align T-Rex 450L Dominator Super Combo 6S with new DS450/455 Servos
RH45E21BT
Regular price $599.99 Sale price $450.99NOTE: Canopy of this kit on the picture is for ILLUSTRATION PURPOSE ONLY
Battery recommend for this kit is PLU70-14506
The internationally popular T-Rex 450 has long been a trend setting helicopter, every enthusiasts probably has owned at least one. It is the ideal model for beginners as well as experts practicing advanced maneuvers. Now the T-Rex 450 evolution continues, as Align drops another shocker into the market; with even more innovative designed incorporated, the brand new T-Rex 450L Dominator.
T-Rex 450L reverses the common impression people have on T-Rex 450, with material integration technology utilized on side frame design, and has features previously found only on larger models, such as battery mounting rails, top mounted motor, 700E DFC type main bearing block with integrated servo mounts, forming striking resemblances to larger contest grade models. The newly added frame reinforcement plates not only improves helicopter's overall rigidity and anti-torsion characteristics, the beautiful red anodizing also creates highly pleasing aesthetics, further exhibits the T-Rex 450L's attractiveness and exclusiveness. In addition, the T-Rex 450L cleverly expands on the core concepts of T-Rex 450 Pro designs, to carry on the heritage of its mature design of excellence.
Equipped with the DFC flybarless head assembly, paired with newly designed 3D specific 360 3G main rotor blades that are both stable and agile, improving anti-torsion characteristics and power output during flight, resulting in even better flight stability. Based on 6s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR. When paired with RCE-BL45X brushless speed controller, the motor has superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree. Brand new DS450 servos controls the swashplate, with feature such as improved torque and speed, along with double bearing support, resulting in minimal deadband and better longevity.
With cutting edge design concepts and top grade electronics, T-Rex 450L Dominator surpasses traditional flight performances with higher stability, extreme power, superior control feel, yet maintains the convenience of smaller size. The T-Rex 450L Dominator is a model not to be missed!
The high-end Microbeast PLUS 6-axis gyro with 32-bit high-speed processor is much precise and superior in programming and computing allow for significant handling performance and delicate response. In addition, the Microbeast PLUS gyro is vibration-reducing improvement and strongly reduce the effects of the vibration to flying performance.
Equipped with the DFC flybarless head assembly, with extremely low CG design to minimize wind resistance while providing more direct control feel. In addition, the brand new main rotor head block and new spindle design has been incorporated as standard feature. Paired with newly designed 3D specific 360 3G main rotor blades that are both stable and agile, resulting in improved flight performance.
Carbon side frame plates utilized composite material integration technology, featuring integrated battery mounting rails. The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing. In addition, the T-Rex 450L cleverly expands on the core concepts of T-Rex 450Pro designs, to carry on the heritage of its mature design of excellence.
Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts similar to that of T-Rex 700E DFC, for simplified servo installation and clean aesthetic. Brand new DS450 servos feature improved torque and speed, with dual bearings design to minimize deadband and provide better longevity.
Based on 6s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
Brand new battery mounting plate with battery latching design, along with integrated mounting rails in side frames to simplify battery installs while protecting them.
New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights.
Added tailboom support bridge design to increase the rigidity of the overall tailboom/support assembly.
Brand new tail blade grips with thrust bearing design, dramatically increase rudder precision and tail locking effectiveness, while increasing the longevity of bearings. The brand new extended tail rotor blades to match the 360mm main rotor blades also contributes to the tail locking performance. The new style paint scheme provides better visibility in midair.
New style dual point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.
Standard equipment
- Microbeast PLUS Flybarless System X 1 set
- RCE-BL45X 45A Brushless ESC X 1
- 460MX Brushless Motor(1800KV) X 1
- DS450 Digital Servo X 3
- DS455 Digital Servo X 1
Specification
- Length: 705mm
- Height: 205mm
- Width: 110mm
- Main Blade length: 360mm
- Main Rotor Diameter: 804mm
- Tail Rotor Diameter: 171mm
- Motor Drive Gear: 11T
- Main Drive Gear: 121T
- Autorotation Tail Drive Gear: 106T
- Tail Drive Gear: 25T
- Drive Gear Ratio: 1:11:4.24
- Weight(w/o battery): 730g
Accessories
- T-REX 450L DOMINATOR Set X 1 set
- Microbeast PLUS Flybarless System X 1 set
- 360 Carbon Fiber Blades X 1 set
- RCE-BL45X 45A Brushless ESC X 1
- 460MX Brushless Motor(1800KV) X 1
- DS450 Digital Servo X 3
- DS455 Digital Servo X 1
Radio transmitter and electronic equipment required for assembly:
1. Transmitter (6-channel or more, helicopter system)
2.Receiver (6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1100~1400mAh battery x 1
Battery recommend (PLU70-14506)
Align T-REX 760X Top Combo Helicopter
RH76E01AT
Regular price $1,999.99 Sale price $1,793.99
The brand new Align T-REX 760X features with new body length and new 760 main blade for F3C/3D flight design providing the outstanding performance than other series will give you the different flying feeling.
The new 700FL rotor head system can use new F3C rotor holder arm and 3D rotor holder arm. F3C rotor holder arm effectively doubles the flight stability with excellent and precise control accuracy not only has more advantages in the static flight also provide the perfect controlling feel in 3D flight. 3D rotor holder arm suitable for extreme 3D flight provides the more direct and faster control response. Main rotor grip arm and linkage rod is at 90-degree angle symmetrically, allow to keep the best precise flight performance. Also the new 760 main blade features with better flight stability and superior lift making the T-REX 760X in the control feel and stability better than other models. Utilized the three tail blade set as standard accessory feature with excellent controlling feel and superior tail authority allowing you to enjoy the flying no matter F3C or 3D flight.
T-REX 760X introduced the advanced engineered narrow body design efficiently decreases gear abrasion, machine deformation, increases power, and extends flying durability. The unique Split-Type Main Frame design, made of composite material side plates, is engineered using our proprietary embedding technology, which strengthens the entire structure and provides better accessibility for servicing the T-REX 760X. This extraordinary design includes a progressive lightweight landing skid making the T-REX 760X the leader in this class. The lightweight structure design which significantly reduce the body weight can effectively increase your flight time.
The T-REX 760X is equipped with the new 850MX motor which is highly efficient with superior power, excellent torque, low current draw, and is the most advanced motor approved by World RC Champions. The new designed motor cooling mount plate can reduce the motor operating temperature up to 20°C (68°F). The helicopter’s high quality design is accented with precision machined red and silver metal parts. The brand new Platinum HV 200A V4 ESC supplies extreme power. The ESC includes a superior governor and BEC. The NEW DS820M/DS825M high voltage brushless servos are more efficient and outperform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.
T-REX 760X introduced many new design with top equipment providing excellent performance allowing any flying style no matter F3C or 3D flight. If you don’t have any big helicopter, T-REX 760X must your best choice.
The 700EFL Flybarless Rotor Head System utilizes extreme low CG design to effectively reduce resistance during 3D maneuvers while increasing flight responsiveness and precision. In addition, the high quality of the helicopter design is accented with red anodized and stainless color precision machined metal parts.
Two new holder arms with CNC cutting provide a neat and smooth lines and appearance, showing out of the ordinary.
After thinking again and again and numerous washes to practice the essence, gestate a new F3C holder arm, effectively doubling the flight stability, and the excellent fine control accuracy; not only in the static flight has more advantages in the dynamic flight also has more outstanding control feeling. The 3D holder arm has excellent rigidity and toughness, suitable for extreme 3D flight, features with more direct and faster response, also enhance the flight stability, allowing to stimulate the infinite possibilities.
Align Advanced Metal Swashplate firmly connects to rotor grips preventing rotor head disengagement during intense flight. Two linkage ball mounting holes provided to improve control of system movement. A resolution hole or larger movement reaction hole can be selected based on your flying preference or style.
Main Rotor Grip Arm and Linkage Rod is at 90-degree angle symmetrically, allow to keep the best precise flight performance.
New extended 760 carbon fiber main blades effectively improve the flying stability and power performance. Enhance the power for better control and redefine your flying experience. And it features new airfoil and printed graphics, increased rigidity and extended length, effectively increases anti-torsion strength during flight.
Integration of CNC Aluminum alloy and POM Polyacetal which can lower friction between the linkage ball and the Metal Anti Rotation Bracket. In addition, this new design increases the efficiencies and accuracy of the servos.
Engineered Narrow Body Design efficiently decreases gear abrasion and machine deformation. The Align T-Rex 700X newly designed narrow body is more powerful and has longer flying durability.
New 3K Main frame embedded with battery mounting rails with patented spring loaded latching mechanism. Brand new CG adjustable CNC Aluminum Battery Mount with movable latch design allow to adjust CG for different battery size, as well as providing great protection for the battery and convenient way for mounting.
Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and super efficient reaction time, allowing the Align 700X to perform faster with precision. The brand new DS820M high voltage brushless servo is equipped with a new CNC machined aluminum case. This new aluminum case exhibits top of the line servo aesthetics while providing a heat sink function for the best protection of the servo.
Innovative Servo Embedded Mount. Servo mount manufactured using the latest composite material technology to integrate carbon fiber and POM (polyacetal), which efficiently strengthen its protective function and reduces abrasion of signal wires.
Composite material side plates engineered by exclusive embedding technology, which strengthens the entire structure and eases serviceability.
Highly enhance structural strength, effectively increase the torsional capability.
The high-end Microbeast PLUS 6-axis gyro with 32-bit high-speed processor is much precise and superior in programming and computing allow for significant handling performance and delicate response. In addition, the Microbeast PLUS gyro is vibration-reducing improvement and strongly reduce the effects of the vibration to flying performance.
Our new 850MX motor inherited features from the previous 800MX such as high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 850MX is capable of maintaining a more consistent torque and head speed through continuous 3D maneuvers. This is a particularly designed for 3D flights.
The CNC Plate is designed to strengthen the Align 700X frame while efficiently acting as a heat sink to efficiently dissipate motor heat. (This can lower motor temperature up to 20 degrees Celsius during flight).
Landing skid is tilted 5 degree forward which improves crash worthiness.
The brand new 700E three tail blade set is specially made from aerospace grade aluminum alloy with precise mechanical process, highly enhance structural rigidity and precision. Total 3 tail blades design allow to achieve superior tail-lock performance and excellent controlling feel. For those who is addicted to 3D flying, you must convert to the three tail blade set and enjoy the amazing powerful flight performance.
Use with HOBBYWING Platinum HV 200A V4 Brushless ESC:
1.The innovative "duo" stacking structure allows all components on both sides of the printed circuit boards to quickly conduct heat to the aluminum case.
2.High-performance 32-bit processor combined with advanced algorithm makes the motor speed-governing excellent for different conditions. With the adjustable sensitivity of speed-governing, every pilot can find the most suitable settings for his helicopter.
3.Platinum-HV-200A makes the motor start extremely soft and avoids tail-drift issues of helicopter.The start-up time is adjustable within 8 to 25 seconds, this will definitely create a perfect starting point for every flight.
4.The built-in switch mode BEC with a continuously adjustable output voltage, range from 5V to 8V(step: 0.1V). It is certain to put out the power you need for rapid, precise steering servo operation.
5.A high quality, and high voltage MOSFET with a great current endurance guarantees the ESC’s safety especially in a extremely high power demanding situation.
6.Built-in spark proof circuit effectively eliminates sparks produced at the “powering-on” moment and prolongs the connector's lifespan.
7.Support ASBOX multi function programmer set up.
8.Innovative Heat Dissipation Structure:The innovative "duo" stacking structure allows all components on both sides of the printed circuit boards to quickly conduct heat to the aluminum case.
Brand new tail blade designed to sustain optimal tail authority performance under high head speed and extreme flight conditions.
Standard equipment
•760X Painted Canopy x 1•3D Holder Arm x 1
•F3C Holder Arm x 1
•Progressive Lightweight Landing Skid x 1
•700 PRO Carbon Fiber Vertical Stabilizer x1
•Main Blade Holder x 1
Electric equipment
•Platinum HV 200A V4 Brushless ESC x 1•850MX Brushless Motor(490KV/4535) x 1
•DS820M High Voltage Brushless Servo x 3
•DS825M High Voltage Brushless Servo x 1
•Microbeast PLUS Flybarless System x 1
Specification
•Length: 1390mm•Height: 360mm
•Width: 195mm
•Main Blade Length: 760mm
•Main Rotor Diameter: 1702mm
•Tail Rotor Diameter: 287mm
•Motor Drive Gear:12T
•Main Drive Gear:112T
•Auto rotation Tail Drive Gear: 102T
•Tail Drive Gear: 23T
•Drive Gear Ratio: 9.33:1:4.43
•Weight(w/o Battery): Approx. 3750g
Accessories
•T-REX 760X Kit Set x 1 set•760 Carbon Fiber Blades x 1 set(2pcs)
•105mm Carbon Fiber Tail Blades x 1 set(3pcs)
•850MX Brushless Motor(490KV/4535) x 1
•DS820M High Voltage Brushless Servo x 3
•DS825M High Voltage Brushless Servo x 1
•Platinum HV 200A V4 Brushless ESC x 1
•Microbeast PLUS Flybarless System x 1
Radio transmitter and electronic equipment required for assembly:
•Transmitter(6-channel or more, helicopter system)•Receiver(6-channel or more)
•6S Li-Po 4500 ~ 6000mAh x 2
•Digital Pitch Gauge
Align T-REX 760X Helicopter KIT Dominator
RH76E04XT
Regular price $1,299.99 Sale price $1,037.99The brand new Align T-REX 760X features with new body length and new 760 main blade for F3C/3D flight design providing the outstanding performance than other series will give you the different flying feeling.
The new 700FL rotor head system can use new F3C rotor holder arm and 3D rotor holder arm. F3C rotor holder arm effectively doubles the flight stability with excellent and precise control accuracy not only has more advantages in the static flight also provide the perfect controlling feel in 3D flight. 3D rotor holder arm suitable for extreme 3D flight provides the more direct and faster control response. Main rotor grip arm and linkage rod is at 90-degree angle symmetrically, allow to keep the best precise flight performance. Also the new 760 main blade features with better flight stability and superior lift making the T-REX 760X in the control feel and stability better than other models. Utilized the three tail blade set as standard accessory feature with excellent controlling feel and superior tail authority allowing you to enjoy the flying no matter F3C or 3D flight.
T-REX 760X introduced the advanced engineered narrow body design efficiently decreases gear abrasion, machine deformation, increases power, and extends flying durability. The unique Split-Type Main Frame design, made of composite material side plates, is engineered using our proprietary embedding technology, which strengthens the entire structure and provides better accessibility for servicing the T-REX 760X. This extraordinary design includes a progressive lightweight landing skid making the T-REX 760X the leader in this class. The lightweight structure design which significantly reduce the body weight can effectively increase your flight time.
The T-REX 700X is equipped with the new 850MX motor which is highly efficient with superior power, excellent torque, low current draw, and is the most advanced motor approved by World RC Champions. The new designed motor cooling mount plate can reduce the motor operating temperature up to 20°C (68°F). The helicopter's high quality design is accented with precision machined red and silver metal parts.
T-REX 760X introduced many new design with top equipment providing excellent performance allowing any flying style no matter F3C or 3D flight. If you don't have any big helicopter, T-REX 760X must your best choice.
Landing skid is tilted 5 degree forward which improves crashworthiness.
New extended 760 carbon fiber main blades effectively improve the flying stability and power performance. Enhance the power for better control and redefine your flying experience. And it features new airfoil and printed graphics, increased rigidity and extended length, effectively increases anti-torsion strength during flight.
Brand new tail blade designed to sustain optimal tail authority performance under high head speed and extreme flight conditions.
Engineered Narrow Body Design efficiently decreases gear abrasion and machine deformation. The Align T-Rex 700X newly designed narrow body is more powerful and has longer flying durability.
The 700EFL Flybarless Rotor Head System utilizes extreme low CG design to effectively reduce resistance during 3D maneuvers while increasing flight responsiveness and precision. In addition, the high quality of the helicopter design is accented with red anodized and stainless color precision machined metal parts.
Two new holder arms with CNC cutting provide a neat and smooth lines and appearance, showing out of the ordinary.
After thinking again and again and numerous washes to practice the essence, gestate a new F3C holder arm, effectively doubling the flight stability, and the excellent fine control accuracy; not only in the static flight has more advantages in the dynamic flight also has more outstanding control feeling. The 3D holder arm has excellent rigidity and toughness, suitable for extreme 3D flight, features with more direct and faster response, also enhance the flight stability, allowing to stimulate the infinite possibilities.
Align Advanced Metal Swashplate firmly connects to rotor grips preventing rotor head disengagement during intense flight. Two linkage ball mounting holes provided to improve control of system movement. A resolution hole or larger movement reaction hole can be selected based on your flying preference or style.
Main Rotor Grip Arm and Linkage Rod is at 90-degree angle symmetrically, allow to keep the best precise flight performance.
Our new 850MX motor inherited features from the previous 800MX such as high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 850MX is capable of maintaining a more consistent torque and head speed through continuous 3D maneuvers. This is a particularly designed for 3D flights.
The CNC Plate is designed to strengthen the Align 700X frame while efficiently acting as a heat sink to efficiently dissipate motor heat. (This can lower motor temperature up to 20 degrees Celsius during flight).
New 3K Main frame embedded with battery mounting rails with patented spring loaded latching mechanism. Brand new CG adjustable CNC Aluminum Battery Mount with movable latch design allow to adjust CG for different battery size, as well as providing great protection for the battery and convenient way for mounting.
Integration of CNC Aluminum alloy and POM Polyacetal which can lower friction between the linkage ball and the Metal Anti Rotation Bracket. In addition, this new design increases the efficiencies and accuracy of the servos.
Composite material side plates engineered by exclusive embedding technology, which strengthens the entire structure and eases serviceability.
Highly enhance structural strength, effectively increase the torsional capability.
The brand new 700E three tail blade set is specially made from aerospace grade aluminum alloy with precise mechanical process, highly enhance structural rigidity and precision. Total 3 tail blades design allow to achieve superior tail-lock performance and excellent controlling feel. For those who is addicted to 3D flying, you must convert to the three tail blade set and enjoy the amazing powerful flight performance.
Standard equipment
•760X Painted Canopy x 1•3D Holder Arm x 1
•F3C Holder Arm x 1
•Progressive Lightweight Landing Skid x 1
•700 PRO Carbon Fiber Vertical Stabilizer x1
•Main Blade Holder x 1
Electric equipment
•850MX Brushless Motor(490KV/4535) x 1Specification
•Length: 1390mm•Height: 360mm
•Width: 195mm
•Main Blade Length: 760mm
•Main Rotor Diameter: 1702mm
•Tail Rotor Diameter: 287mm
•Motor Drive Gear:12T
•Main Drive Gear:112T
•Autorotation Tail Drive Gear: 102T
•Tail Drive Gear: 23T
•Drive Gear Ratio: 9.33:1:4.43
•Weight(w/o Battery): Approx. 3750g
Accessories
•T-REX 760X Kit Set x 1 set•760 Carbon Fiber Blades x 1 set(2pcs)
•105mm Carbon Fiber Tail Blades x 1 set(3pcs)
•850MX Brushless Motor(490KV/4535) x 1
Radio transmitter and electronic equipment required for assembly:
•Transmitter(7-channel or more, helicopter system)
•Receiver(7-channel or more)
•6S Li-Po 4500 ~ 6000mAh x 2
•Digital Pitch Gauge
•CCPM Servo x 3
•Tail Servo x 1
•ESC x 1
•Flybarless System x 1
Align T-REX 700X Helicopter TOP Combo (Platinum HV 200A ESC)
RH70E35AT
Regular price $1,899.99 Sale price $1,793.99All-New Align T-REX 700X is specially designed for extreme 3D flight addicts.
The advanced engineered narrow body design efficiently decreases gear abrasion, machine deformation, increases power, and extends flying durability. The unique Split-Type Main Frame design, made of composite material side plates, is engineered using our proprietary embedding technology, which strengthens the entire structure and provides better accessibility for servicing the T-REX 700X. This extraordinary design includes a progressive lightweight landing skid making the T-REX 700X the leader in the 700 class. The Align T-Rex 700X is 400g (0.882lbs) lighter than our pervious model, this can effectively increase your flight time. The brand new 700EFL Flybarless Rotor Head System utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision.
The T-REX 700X is equipped with the new 850MX motor which is highly efficient with superior power, excellent torque, low current draw, and is the most advanced motor approved by World RC Champions. The new designed motor cooling mount plate can reduce the motor operating temperature up to 20°C (68°F). The helicopter’s high quality design is accented with precision machined red and silver metal parts. The brand new RCE-BL130A brushless ESC supplies extreme power. The ESC includes a superior governor and BEC which allows you to set 5V-8V (Step: 0.1V). The NEW DS820M/DS825M high voltage brushless servos are more efficient and out perform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.
We developed the ultimate perfect 700 class helicopter which is stronger, yet lightweight, and built with precision manufactured high-quality parts. The T-REX 700X, King of the Sky, has arrived! What are you waiting for? The innovative design and high-end electronics will give you an adrenaline rush!
Manufactured with durable lightweight fiber material, and utilizing an engineered aerodynamic design, the Align Advanced Lightweight Canopy forms a protective shield for the entire machine.
Landing skid is tilted 5 degree forward which improves crashworthiness.
Engineered Narrow Body Design efficiently decreases gear abrasion and machine deformation. The Align T-Rex 700X newly designed narrow body is more powerful and has longer flying durability.
The 700EFL Flybarless Rotor Head System utilizes extreme low CG design to effectively reduce resistance during 3D maneuvers while increasing flight responsiveness and precision. In addition, the high quality of the helicopter design is accented with red anodized and stainless color precision machined metal parts.
Align Advanced Metal Swashplate firmly connects to rotor grips preventing rotor head disengagement during intense flight. Two linkage ball mounting holes provided to improve control of system movement. A resolution hole or larger movement reaction hole can be selected based on your flying preference or style.
The high-end Microbeast PLUS 6-axis gyro with 32-bit high-speed processor is much precise and superior in programming and computing allow for significant handling performance and delicate response. In addition, the Microbeast PLUS gyro is vibration-reducing improvement and strongly reduce the effects of the vibration to flying performance.
Our new 850MX motor inherited features from the previous 800MX such as high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 850MX is capable of maintaining a more consistent torque and head speed through continuous 3D maneuvers. This is a particularly designed for 3D flights.
The CNC Plate is designed to strengthen the Align 700X frame while efficiently acting as a heat sink to efficiently dissipate motor heat. (This can lower motor temperature up to 20 degrees Celsius during flight)
Use with HOBBYWING Platinum HV V4 ESC:
1.Fast throttle feedback, much stable and agile performance enhancement.
2.Fast processer extend.
3.Cool ESC temperature keep performance much reliable.
4.Support ASBOX Multifunction Programmer set up.
5.Support Firmware Update.
3K Main frame features; embedded battery mounting rails, integrated magazine structure, and a latch design. The CNC Aluminum Battery Mount provides great protection for the battery while providing a convenient way for mounting.
Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and super efficient reaction time, allowing the Align 700X to perform faster with precision. The brand new DS820M high voltage brushless servo is equipped with a new CNC machined aluminum case. This new aluminum case exhibits top of the line servo aesthetics while providing a heat sink function for the best protection of the servo.
Innovative Servo Embedded Mount. Servo mount manufactured using the latest composite material technology to integrate carbon fiber and POM (polyacetal), which efficiently strengthen its protective function and reduces abrasion of signal wires.
Integration of CNC Aluminum alloy and POM Polyacetal which can lower friction between the linkage ball and the Metal Anti Rotation Bracket. In addition, this new design increases the efficiencies and accuracy of the servos.
Composite material side plates engineered by exclusive embedding technology, which strengthens the entire structure and eases serviceability.
Highly enhance structural strength, effectively increase the torsional capability.
A simple enhanced Multiple-bearing design allows smooth and accurate movement. Take control of your T-Rex 700X just the way you like it!
Electric equipment
•HOBBYWING Platinum HV 200A V4 •Brushless ESC x 1•850MX Brushless Motor(490KV/4535) x 1
•DS820M High Voltage Brushless Servo x 3
•DS825M High Voltage Brushless Servo x 1
•Microbeast PLUS Flybarless System x 1
Specification
•Length: 1320mm•Height: 360mm
•Width: 195mm
•Main Blade Length: 700mm
•Main Rotor Diameter: 1582mm
•Tail Rotor Diameter: 281mm
•Motor Drive Gear:13T
•Main Drive Gear:110T
•Autorotation Tail Drive Gear: 104T
•Tail Drive Gear: 22T
•Drive Gear Ratio: 8.46:1:4.37
•Weight(With Battery): Approx. 5100g
Accessories
•T-REX 700X Kit Set x 1 set•700 Carbon Fiber Blades x 1 set
•106mm 3K Carbon Fiber Tail Blades x 1 set
•850MX Brushless Motor(490KV/4535) x 1
•DS820M High Voltage Brushless Servo x 3
•DS825M High Voltage Brushless Servo x 1
•HOBBYWING Platinum HV 200A V4 Brushless ESC x 1
•Microbeast PLUS Flybarless System x 1
Radio transmitter and electronic equipment required for assembly:
•Transmitter(6-channel or more, helicopter system)
•Receiver(6-channel or more)
•6S Li-Po 4500 ~ 5200mAh x 2
•Digital Pitch Gauge
Align T-REX 600XN Nitro Helicopter Dominator Super Combo RH60N06XT
RH60N06XT
Regular price $1,699.99 Sale price $1,554.99One of the most classic ALIGN models, T-REX 600N nitro helicopter. In 2018, we bring you the brand new design of T-REX 600XN, it inherits the design of T-REX 700XN featuring innovation, rigidity and lightness. Extremely perfection and precision, the T-REX 600XN is about to excite your inner soul to bring back your passion for nitro.
T-REX 600XN adopts the new direct to swashplate servo design, compared to the previous generation T-REX 600N’s push-pull mode control, provides precise and fast control! Utilizing the 550 Flybarless Rotor Head System features an extremely low Center of Gravity (CG) design, to effectively reduces resistance during 3D maneuvers, and increase flight responsiveness and precision. This designed maintains a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior stable flight performance. The Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The T-REX 600XN maintains the proper CG, by moving the engine forward to allow the fuel tank to be positioned in the center of the main shaft. CG remains consistent as the fuel level changes during flight.
The new steel alloy clutch liner is durable with temperature control designed to avoid the exploding clutch liner or a breaking clutch housing. The steel alloy clutch liner extends the life to over a 1000 flights. The Receiver Mount provides cable and wiring protection, and easy to maintenance by removing a few screws from the mainframe.
The new high voltage output: 6A 7.4V BEC with down / regulation system for constant power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servos use brushless motors for fast speed, high torque, superior, and efficient reaction time allows the Align 600XN precise, fast performance. The new CNC machined aluminum case design is aesthetically appealing while acting as a highly efficient heat sink.
The new generation of T-REX 600XN innovative design will excite your inner soul to bring back your passion for nitro!
After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and achieves best dynamic performance. Also a new unique paint scheme for the newest member of the T-REX family.
Landing skid is tilted 5 degree forward which improves crashworthiness.
Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The Align T-REX new narrow body design is stronger and increases flight durability.
The new direct to swashplate servo design provides precise and fast control. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance.
Align Advanced Metal Swashplate strongly connects to the rotor holder grips preventing rotor head disengagement during intense flight. Two optional linkage ball mounting holes allow for personal selection of resolution based on desired flight performance.
Receiver mount provides cable and wiring protection, easy to maintain equipment by removing a few screws from the mainframe.
Maintaining the proper Center of Gravity CG is important for helicopters. After extensive Research and Development, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft. This optimum location for the fuel tank permits the 600XN to maintain consistent CG as the fuel level changes during flight.
The idler pulley gear improves rotation stability and effectively reduces the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and wear resistant.
CNC metal reinforcement plate and brace align with frame mounting bolts effectively increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the improved reinforcement to the mainframe. Also, the plate helps with engine cooling and adds additional protection for the motor.
Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 600XN precise, fast performance. The brand new DS820M high voltage brushless servo has a with a new CNC machined aluminum case. The new aluminum case design is aesthetically appealing while acting as a highly efficient heat sink for superior protection of the servo.
High voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.
MADE IN JAPAN ALIGN Hyper engine for superior 55 size helicopter
?40L dual needle carburetor, makes the adjustment much more precisely.
?Delivers more horsepower for higher rotor speeds.
?Brand new crankshaft design. Increase the efficiency of intake/exhaust and makes the power stronger.
?Besides good looks and excellent cooling, this engine is machined blue alumite heat sink head also boosts combustion efficiency for more power stability.
?Same size connector to the mount and the muffler as what Align 50 Hyper engine has,Maximize the efficiency when operating with ALIGN 50 High Performance Muffler.
An integrated motor mounting bracket allows for efficient heat dissipation from the motor. The superior Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for aesthetically pleasing appearance.
Dual-sided tail servo mount strengthens the entire frame structure while allowing for better accessibility when servicing the 600XN.
Brand new strengthened precision design with high-end M4x8 hexagonal screw upgrade. The new rigid design improves and strengthens the entire structure enhancing tail performance for all pilots.
Electric equipment
?ALIGN 55H Engine x 1?ALIGN 50 High Performance Muffler x 1
?DS820M High Voltage Brushless Servo x 3
?DS825M High Voltage Brushless Servo x 1
?DS530 Digital Servo x 1
?B6M 2 In 1 Voltage Regulator x 1
?Governor Sensor x 1
Specification
?Length: 1152mm?Height: 356mm
?Width: 189mm
?Main Blade Length: 600mm
?Main Rotor Diameter: 1354mm
?Tail Rotor Diameter: 260mm
?Motor Pinion Gear: 20T
?Main Drive Gear: 170T
?Autorotation Tail Drive Gear: 180T
?Tail Drive Gear: 40T
?Drive Gear Ratio: 8.5:1:4.5
?Fuel Tank Capacity: 440cc.
?Takeoff Weight: 3400g
Accessories
?T-REX 600XN DOMINATOR Set x 1set?600 Carbon Fiber Blades x 1set
?95mm 3K Carbon Fiber Tail Blades x 1set
?ALIGN 55H Engine x 1
?ALIGN 50 High Performance Muffler x 1
?DS820M High Voltage Brushless Servo x 3
?DS825M High Voltage Brushless Servo x 1
?DS530 Digital Servo x 1
?B6M 2 In 1 Voltage Regulator x 1
?Beastx Governor Sensor x 1
Radio transmitter and electronic equipment required for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?Flybarless System x1
?Engine starter x 1
?Fuel pump x 1
?Engine fuel x 1
?Digital Pitch Gauge
Align T-REX 600XN Nitro Helicopter Dominator Combo
RH60N07XT
Regular price $1,299.99 Sale price $1,206.99One of the most classic ALIGN models, is the T-REX 600N nitro helicopter. In 2018, we bring you the brand new design of T-REX 600XN, it inherits the design of T-REX 700XN featuring innovation, rigidity, and lightness. Extremely perfect and precise, the T-REX 600XN is about to excite your inner soul to bring back your passion for nitro.
T-REX 600XN adopts the new direct-to-swashplate servo design, compared to the previous generation T-REX 600N’s push-pull mode control, provides precise and fast control! Utilizing the 550 Flybarless Rotor Head System features an extremely low Center of Gravity (CG) design, to effectively reduces resistance during 3D maneuvers, and increase flight responsiveness and precision. This designed maintains a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior stable flight performance. The Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The T-REX 600XN maintains the proper CG, by moving the engine forward to allow the fuel tank to be positioned in the center of the main shaft. CG remains consistent as the fuel level changes during flight.
The new steel alloy clutch liner is durable with temperature control designed to avoid exploding clutch liner or a breaking clutch housing. The steel alloy clutch liner extends the life to over 1000 flights. The Receiver Mount provides cable and wiring protection and is easy to maintain by removing a few screws from the mainframe.
The new high voltage output: 6A 7.4V BEC with a down/regulation system for constant power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug-on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servos use brushless motors for fast speed, high torque, and superior, and efficient reaction time allowing the Align 600XN precise, fast performance. The new CNC machined aluminum case design is aesthetically appealing while acting as a highly efficient heat sink.
The new generation of T-REX 600XN innovative design will excite your inner soul to bring back your passion for nitro!
Electric equipment
?DS820M High Voltage Brushless Servo x 3?DS825M High Voltage Brushless Servo x 1
?DS530 Digital Servo x 1
?B6M 2 In 1 Voltage Regulator x 1
?Governor Sensor x 1
Specification
?Length: 1152mm?Height: 356mm
?Width: 189mm
?Main Blade Length: 600mm
?Main Rotor Diameter: 1354mm
?Tail Rotor Diameter: 260mm
?Motor Pinion Gear: 20T
?Main Drive Gear: 170T
?Autorotation Tail Drive Gear: 180T
?Tail Drive Gear: 40T
?Drive Gear Ratio: 8.5:1:4.5
?Fuel Tank Capacity: 440cc.
?Takeoff Weight: 3400g
Accessories
?T-REX 600XN DOMINATOR Set x 1set?600 Carbon Fiber Blades x 1set
?95mm 3K Carbon Fiber Tail Blades x 1set
?DS820M High Voltage Brushless Servo x 3
?DS825M High Voltage Brushless Servo x 1
?DS530 Digital Servo x 1
?B6M 2 In 1 Voltage Regulator x 1
?Beastx Governor Sensor x 1
Radio transmitter and electronic equipment required for assembly:
Align T-REX 500XT Helicopter (Torque Tube Drive) TOP Combo (RCE-BL80X ESC) - RH50E23XT
RH50E23XT
Regular price $899.99 Sale price $844.99Experienced in numerous of innovations, the brand new T-REX 500XT is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500XT model ever. The New Torque Drive System; The Better Performance Advantage.
Refresh and refine, T-REX 500XT adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500XT main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. T-REX 500XT landing skid is tilted 5 degrees forward to improve crashworthiness.
T-REX 500XT utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530M/DS535M digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.
Equipped with all the top end electronic devices, T-REX 500XT is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.
New extended 470mm main blades for T-REX 500X effectively improve the flying stability and power performance. Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters.
New 78 size tail blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.
The brand new low CG 500FL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity. Allow to reduce resistance during 3D maneuvers, increased flight responsiveness and precision. In addition, the styling appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.
New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.
New 520MX(1600KV/3527) motor features high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. Allow to provide maintaining consistent torque and head speed through continuous 3D maneuvers.
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.
Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.
Brand new ESC controller is built-in with BEC voltage setting, allow for continuous current 10A and more, also support surge current support up to 25A, much powerful and precision. Moreover, it utilize with high quality 32 bit M4 ARM processor and superior governor performance, support the best flight performance for all pilots in every level.
Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.
DS530M HV Cyclic and DS535M HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.
Ultilize of strengthen main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the fficiency, speed, and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficient design to deliver the ultimate performance.
Landing skid is tilted 5 degrees forward to improve crashworthiness.
A 19mm wide Tail Boom to improves the torsional strength.
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.
The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 78 size Tail Blades.
Standard equipment
Microbeast PLUS Flybarless System x 1 setRCE-BL80X Brushless ESC x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530M Digital servo x 3
DS535M Digital servo x 1
Specification
Length: 935mmHeight: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Pinion Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Drive Gear: 21T
Drive Gear Ratio: 11.17:1:3.81
Weight(w/o battery): approx. 1450g
Accessories
T-REX 500X KIT Set x 1Microbeast PLUS Flybarless System x 1 set
470 Carbon Fiber Blades x 1
78 Tail Rotor Blade x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530M Digital servo x 3
DS535M Digital servo x 1
RCE-BL80X Brushless ESC x 1
Radio transmitter and electronic equipment required for assembly:
Transmitter(6-channel or more, helicopter system)
Receiver(6-channel or more)
6S Li-Po 2600 ~ 3300mAh (3300mAh suggestion) PLU50-33006 or PLU70-33006
Digital Pitch Gauge